Mini SAS to 4 SATA Cable, 36 Pin SFF 8087 Host/Controller to 7 Pin SATA Target/Backplane, Compatible with PERC H310, RAID Controller (SFF-8087 to 4SATA Forward Breakout) 1.6 Feet
$11.64 $9.89
10 in stock
Description
- Internal Mini SAS data cable connects a RAID or PCIe controller with an SFF-8087 port to 4 discrete SATA drives; Mini SAS 36 (SFF-8087) male is to connect to the Motherboard or Raid controller, 4x SATA is to connect to the backplane.
- Leverage hardware raid performance with this SATA multi-lane cable; Two cables can connect up to 8 SATA drives to span RAID controller arrays and share performance across two PCIe 2.0 x8 lanes with compatible host bus adapters; Supports up to 6Gbs data transfer rate per drive
- DIY or pro installers both appreciate the convenience of a forward fan-out cable with an internal mSAS connector when expanding storage needs; 1.6FT cable harness of SAS to SATA cable provides sufficient length for internal cable management; Slim ribbon cables minimize airflow impact in a computer case
- Flexible design of SAS breakout cable includes acetate cloth tape over slim ribbon cables for strain relief to protect cables without rigidity; Woven mesh sheath covers half of the cable for easy routing; P1 to P4 markers provide easy ID after installation; Low profile SATA connectors have easy-grip treads with stainless steel latches to prevent accidental disconnection and reduce vibration disconnection
Product Description
- The SFF-8087 to 4 SATA 7pin cable is typically used to connect the SFF-8087 Mini SAS interface on the motherboard to the SATA interface on hard disk drives, primarily used in servers and storage devices.
- This cable can expand one SFF-8087 interface into four independent SATA interfaces, allowing for the connection and data transfer of multiple hard disk drives.
- This cable is suitable for situations that require the simultaneous connection of multiple hard disk drives, such as data backup, storage expansion, or RAID array configuration in servers.
To ensure that you are purchasing the correct mini SAS SFF-8087 to 4 SATA forward breakout cable for your device
To ensure that you are purchasing the correct mini SAS SFF-8087 to 4 SATA forward breakout cable for your device, you can take the following steps:
- Refer to the specifications manual of your device to confirm the required interface type and specifications.
- Please check the product descriptions in detail, making sure the mini sas cable aligns with the specifications and interface type of your device.
- Look at user reviews and feedback to understand other people’s experiences with purchasing the cable and whether it is compatible with their devices.
Mini Sas SFF-8087 to 4Sata 7pin
SFF-8087 to 4*7PIN SATA Drives
- P1 to P4 markers provide easy identification after installation
- Locking latches for guarteed connection
- Up to 6 GBPS data transfer rate per lane
Excellent welding process,Full point,good consistency.low loss
FEP environmental cover,Silver plater oxygen-free copper core,Aluminum foil shield
PET Woven cable,fire retardant,soft and wear-resistant ,the grade of flame retardant isV1,working temperature:-40℃～+150℃
Reviews (0)
Shipping & Delivery
Related products
One 5G Ace Case, Moto G 5G Case, Graphic Design Shockproof Impact Resistant Protective Full-Body Rugged Clear Hybrid Bumper Case for One 5G Ace (Wiccan)
Select options
This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet.